WiFi Plug

What are the colors on the LED Light represents?

Colours Status
Solid Blue light On
Flashing Blue light Cannot connect to router
Flashing Red light Configuration mode

What is the input power for WiFi Plug?

The input power is at AC 100V-240V 13A.

How to configure the WiFi Plug?

You have to follow the steps below:

1. Download Aztech KylaS app from App Store or Google Play.

2.Plug in WiFi Plug.

3. Open the Aztech KylaS app and tap “+”symbol on the top right corner.

4. Select “WiFi Plug" follow by “KWFP-110-WF” then “Next”.

5. Press and hold the ON/OFF button for six (6) seconds until the LED light flashes rapidly in Red light.

6. Ensure your smart phone or tablet and Aztech KylaS app is connected to the same Wi-Fi network.

7. Select “Aztech KylaS_AP” from the network list.

8. Return to Aztech KylaS app to key-in the password of your router or modem for internet or Wi-Fi access and tap “Connect”.

9. Wait for sixty (60) seconds for Aztech KylaS app to search for your WiFi Plug.

10. Tap “Save”. Installation has completed!

What should I do if the configuration has failed?

  • Ensure your Android device(s) are updated to OS version 4.0 and above
  • Check your smart phone and Wi-Fi connection to search for your router.
  • Ensure you have entered the right password for Wi-Fi.
  • Ensure your router supports wireless IEEE802.11b/g/n standard.
  • Ensure you have entered the right user name of the internet.
  • Ensure your router security mechanism is WEP, WPA-PSK or WPA2-PSK, we recommend WPA/WPA2.
  • Ensure you have an available IP for the router, if not you can disconnect other device and try it again.

    How do I connect the new WiFi Plug to the router?

    You have to configure the new WiFi Plug and connect it to the wireless router again.

    Why does the WiFi Plug show offline sometimes?

    The Wi-Fi connection might be disconnected or not available. You may try to restart the router to connect back the WiFi Plug.

    How many schedule tasks can I set?

    You can set up to fifteen (15) tasks.

    Why does the WiFi Plug’s backlight blink after configuration?

    Please check on the followings:

  • Ensure your router is turned on.
  • Ensure you have entered the correct password.
  • Ensure the router DHCP is available.

    How to control the WiFi Plug by Google Home?

    You have to follow the steps below:

  • Turn on Google Home.
  • Instruct Google Home with the name assigned.